Design requirements for LED cleanroom

Cleanrooms are an important presence in many places. We know that LED chips are precision products, and any impurities may affect their electrical performance. In order to ensure product quality, it is necessary to build an LED dust-free workshop,. So, what are the issues to pay attention to when designing LED cleanrooms? Let's take a look below.

1. Cleanroom terrazzo flooring is required in the cleanroom.

2. The angle between the suspended ceiling and building facilities such as walls and floors in the clean area needs to be connected by a circular arc with a radius of 50 millimeters.

3. The airlock is a double door interlock with good sealing; The door adopts a lock free outward push type. If you want to improve the sealing to a greater extent, it is recommended to use plastic film for sealing.

4. To prevent insect pollution, it is prohibited to plant flowers within 3 meters of the exterior wall of the factory building. Cement ground should be laid, and underground ditches should be used to treat the drainage system, and insect prevention measures should be taken.

5. The idle land in the factory area should also be greened, and attention should be paid to environmental protection issues during later processing, so as not to cause damage to the completed design.

6. If inside the dust-free workshop, it is necessary to use ceiling mounted clean lighting fixtures and ensure proper sealing; The lighting in the clean room needs to be greater than 300 lux; Each auxiliary room and channel lighting only needs to meet a brightness of 150 lux; The general area lighting should not be less than 100 lux.

That's all for the design requirements of LED cleanroom. We hope the content we have introduced is helpful to everyone. The demand for LED cleanrooms in the market is constantly increasing, and in the future, it is necessary to consider multiple aspects when designing. After comparing multiple aspects, the products purchased will be more satisfactory to users.